Pull hammer BIG and LONG in one for cold glue – Cola Fria

Product: MIDIAR glue system - MIDIAR Pull hammer BIG and LONG for cold glue - Cola Fria with 6 adapters and cold glue Cola Fria
Made in: Austria
Total weight with adapters and cold glue: 4.6 kg











Description:
ColdGlue - The pull hammer BIG with screwable adhesive adapter, including 6 adapters and adhesive. Before attaching the adhesive (Cola Fria) to the adapters, degrease the adapters with silicone remover.

Due to its higher weight, the BIG Draw Hammer is suitable for use on thicker metal sheets.

The new method brings very good application possibilities on large dents with the cold glue technique and is suitable for long-term use.
The professional use by the dent pusher is easy, by putting the cold glue on the surface to be treated and pressing out the air by turn- and lateral movements. (If the cold glue is allowed to rest on the surface for about 2 - 3 minutes, it sticks even better. The surface must be free of grease and anhydrous, and at least 20 ° C warm.)


When working with cold glue, it is recommended to remove the rubber damping part, which is installed above the impact part, in order to be able to hit sharper.
Since it is a universal hammer (also for hot glue), we deliver it with this built-in damping part.


After that the pull hammer is used.

Due to the heavy weight of the striking part and the length of the bar, we recommend that you do not use the BIG pulling hammer for working on the roof if you are not tall, because otherwise you have poor leverage when striking.

After the treatment, the adhesive can be easily removed from the surface by slowly pulling it off.


Scope of delivery of the MIDIAR glue system:
1 x pull hammer with moving head, weight 3.6 kg
1 x with extra 1 kg impact weight (this creates a long hammer)
1 x screwable adhesive adapter rectangular: 9 cm x 3.5 cm
1 x screwable adhesive adapter rectangular: 7 cm x 2.5 cm
1 x screwable adhesive adapter round circle diameter: 3 cm
1 x screwable adhesive adapter circular diameter: 5.5 cm
1 x screwable adhesive adapter triangular shape edge length 5 cm
1 x screwable adapter for hot glue
1 x cold glue (Cola Fria) in total approx. 250 g (5 x approx. 50 g)
1 x silicone box with lid



For working in case of major damage.


The durability of the adhesive when used properly (always keep clean) is 1 year.


A product from Austria.


Please note: It is recommended to avoid contact of the adhesive with water, otherwise the adhesive must be carefully kneaded again. Degrease concerning surface before use.