MIDIAR - Cold Glue 50g for the repair of bigger dents

Product: MIDIAR Cold Glue Cola Fria 50g







Description:
MIDIAR glue system - ColdGlue - The pull hammer with screwable adhesive adapter, including 5 adapters and adhesive. Before attaching the adhesive (Cola Fria) to the adapters, degrease the adapters with silicone remover.


The new method brings very good application possibilities on large dents with the cold glue technique and is suitable for long-term use.
The professional use by the dent pusher is easy, by putting the cold glue on the surface to be treated and pressing out the air by turn- and lateral movements. (If the cold glue is allowed to rest on the surface for about 2 - 3 minutes, it sticks even better. The surface must be free of grease and anhydrous, and at least 20 ° C warm.)


After that the pull hammer is used.


After the treatment, the adhesive can be easily removed from the surface by slowly pulling it off.


Scope of delivery:
1 x MIDIAR cold glue (Cola Fria) in total approx. 50 g
Made in Germany




For working in case of major damage.


The durability of the adhesive when used properly (always keep clean) is 1 year.


Please note: It is recommended to avoid contact of the adhesive with water, otherwise the adhesive must be carefully kneaded again. Degrease concerning surface before use.