T-Hotbox PDR 250 watts is a tool for car dent removal and repair without painting,

Induction heater T-Hotbox PDR was designed for instant repair of small and shallow dents on the car body made of ferrous (magnetic) metal, when the metal stress is directed outwards (not inwards).

T Hotbox PDR is also used as an auxiliary solution to a PDR-tool for pulling-out large and sharp dents with subsequent refining using a PDR tool.

Т-Hotbox PDR device allows for shrinking and stabilizing of stretched metal (bucklings), which bounces due to being stretched out.

Operating principle
A metal sheet is heated from the inside on exposure to induction heating (microwave oven principle of operation).

If a metal sheet is exposed to heat for about one second, paint and other polymeric coatings with a destruction temperature of 200 °C take no critical heat damage.

When molecular structure of the metal is rapidly heated, its crystalline lattice is shrinking. And since the metal stress is directed to the top (outwards) a dent is being smoothed.

Exposure time depends on a metal sheet's thickness and may vary from 1 to 4 seconds (max).

If a dent hasn't been smoothed out on the first try, it's necessary to wait until the surface completely cools down (to avoid paint destruction) and repeat the process.

Field of use
This device is capable of facilitating the repair process regarding only small and shallow dents in those car body sectors where the metal stress goes up (outwards – not inwards). This device won't bring the desired effect when using it relative to edges or some sections glued to a stiffener, as the metal stress in such areas is being retained by the metal's flexural bending stiffness or by the glue.

• Shrinking of stretched metal (bucklings)
• Repair of small shallow dents caused by hail
• Removal of small shallow parking dents
• Pulling-out of large and sharp dents caused by hail with subsequent refining using a PDR tool

In terms of dent smoothing out efficacy this device is comparable to a glue system.

Product advantages
• When using this device no consumable materials (such as glue sticks) are needed
• In addition, dent smoothing out process is much faster than in case of a glue system, which increases specialists' productivity and profit
• Ease of use, zero effort
• Mechanical straightening, putty-applying and paint work become redundant
• No consumable materials needed when using this device (putty, primer, paint, power consumption for drying within the spray booth)
• No need to spent time on labor intensive disassembly of parts

This device is under warranty for 12 months. This offer is targeted exclusively to professional car workshops - B2B customers and comes without any right of return.

Its manufacturer and our e-commerce website take no responsibility for incorrect operation of this device.

Technical information:
Input:
Voltage: 230V ± 10%
Radiation frequency: 50 / 60Hz
Internal protection: T6,3A
Maximum total power.: 1100 VA
Output:
Maximum voltage.: 250V rms
Radiation frequency: 50 kHz
Maximum active power.: 1000W
Dimensions: 44x33x25 cm
Weight: 3 kg.

Supply package:
1 x Induction heater Т-Hotbox PDR with 5 m long connection cable
1 х Inductive head
1 х Storing case
1 х User manual in English

You can buy T-Hotbox PDR directly from our e-commerce website.

DELIVERY ONLY WITHIN GERMANY



















Better price or offer? Send us the proof and get additional 5% discount.
We will advise you by telephone at the number 071171940698.