Pull hammer for cold glue – Cola Fria, second hand, PDR

Product: Pull hammer for cold glue - Cola Fria with 6 adapters and cold glue Cola Fria
Made in: Austria
Total weight with adapters and cold glue: 2,9 kg













Description:
ColdGlue - The pull hammer with screwable adhesive adapter, including 5 adapters and adhesive. Before attaching the adhesive (Cola Fria) to the adapters, degrease the adapters with silicone remover.


The new method from Brazil brings very good application possibilities on large dents with the cold glue technique and is suitable for long-term use.
The professional use by the dent pusher is easy, by putting the cold glue on the surface to be treated and pressing out the air by turn- and lateral movements. (If the cold glue is allowed to rest on the surface for about 2 - 3 minutes, it sticks even better. The surface must be free of grease and anhydrous, and at least 20 ° C warm.)


After that the pull hammer is used..


After the treatment, the adhesive can be easily removed from the surface by slowly pulling it off.


Scope of delivery:
1 x pull hammer with moving head, weight 1.9 kg
1 x screwable adhesive adapter rectangular: 9 cm x 3.5 cm
1 x screwable adhesive adapter rectangular: 7 cm x 2.5 cm
1 x screwable adhesive adapter round circle diameter: 3 cm
1 x screwable adhesive adapter circular diameter: 5.5 cm
1 x screwable adhesive adapter triangular shape edge length 5 cm
1 x screwable adapter for hot glue
3 x cold glue (Cola Fria) in total approx. 150 g




For working in case of major damage.


The durability of the adhesive when used properly (always keep clean) is 1 year.


A product from Austria.


Please note: It is recommended to avoid contact of the adhesive with water, otherwise the adhesive must be carefully kneaded again. Degrease concerning surface before use.

This dent pulling method comes to us from Brazil and is featured in the following video, which was disposed in 2010: