Thickness gauge ET 111S

The ET 111S Thickness Gauge is a handy and reliable instrument for coating thickness measurement on ferrous- and nonferrous metals (for example aluminum) without destruction of the painting when buying a vehicle.

With the device it is possible to see in very short time if the car was primed or repainted.

Thus, one can avoid inconveniences such as repairs after purchase and negotiate a discount on detection of a defect by the seller.
By the way - the paint tester ET 111S was developed at the request of our customers and is based on the paint gauge ET 111. The suffix "S" at the ET 111S stands in this case for "simple", it thus is a simplified version of the ET 111th.

The difference from the ET 111 is that the ET 111S has no flashlight function, no ultraviolet light and no protective sheath. This allows us to meet the wishes of many customers for a qualitative and high-quality product at a lower price and we are now offering this capable brand equipment at a cheaper price.

A special feature of the device is that it has a so-called "self-calibration / factory setting". This makes it possible to determine paint thickness differences on the vehicle accurately without requiring the device to be calibrated.

Product features
•    Suitable for measurements on iron / steel and non-ferrous metals
•    Automatic identification of the substrate
•    Approved magnetic induction / eddy current measuring process with integrated measuring probe, without cable
•    Measuring range: 0 to 2000 microns on ferrum
•    0 to 1000 microns on non-ferrum
•    Operating temperature range - 25 ° С to +50 ° С
•    Switchable to microns / mils
•    Audible indicator when taking measured value
•    Soft suspension to protect the measured surface
•    Display with backlight
•    Automatic switch-off after 60 seconds, extending the battery life time
•    78 g in weight and very handy with small dimensions
•    Weight: ca.78g. with battery
•    Accuracy: ± 5 microns from 0 to 200 microns
•    Range Ferr. Microns to 2000 (on iron)
•    Range NoFerr. Microns to 1000 (on aluminum)

SPECIFICATION ELECTRICAL
•    Detectable Substrate Material Ferrous metal (iron, steel)
•    and Non-Ferrous metal (copper, aluminum, zinc, bronze, brass, etc.)
•    Ferrous Thickness Range 0 to 2000 microns
•    Non-Ferrous Thickness Range 0 to 1000 microns
•    Display Resolution 1 micron / 0.1 mils
•    Response Time 1 second.
  
Ferrous Accuracy
•    ±10microns on 0 to 199 microns
•    ±(3%+10microns) on 200 microns to 1000 microns
•    ±(5%+10microns) on 1001 microns to 1999 microns
•    ±0.4mils auf 0 bis 7.8mils
•    ±(3%+0.4mils) on 7.9mils bis 39.0mils
•    ±(5%+0.4mils) on 39.1mils bis 80.0mils
  
Non-Ferrous Accuracy
•    ±10microns on 0 to 199 microns
•    ±(3%+10microns) on 200 microns to 1000 microns
•    ±0.4mils auf 0 to 7.8mils.
•    ±(3%+0.4mils) on 7.9mils bis 40mils.
  
GENERAL
•    Operating Environment -13°F to 122°F (-25°C to 50°C)
•    at < 75% R.H.
•    Storage Temperature -13°F to 140°F (-25°C to 60°C),
•    0 to 80% R.H. with battery removed from meter.
•    Temperature Coefficient 0.1x (specified accuracy) / °C (< 18°C or > 28°C)
•    Auto Power Off:1 minute.
•    Standby Consuming Current < 6μA.
•    Battery 1.5V (AAA size) x 2pcs.
•    Battery Life 17 hours (continuity) typical with alkaline battery.
•    Low Battery Indication, when the battery voltage drops below the operating level.
•    Dimensions: 120mm (H) x 40.4mm(W) x 29.2mm(D).
•    Weight approx. 78 g (including battery).

Scope of delivery:
1 x Thickness Gauge ET 111S
2 x uncoated metal plates for calibration (ferrous and non-ferrous)
1 x standard thickness of plastic for calibration
1 x storage bag
2 x AAA Batteries - not included with delivery to foreign countries - third party countries - only to EU-member countries
1 x operating instructions

The thickness gauge ET-111S is a qualitative, handy, reliable and easy-to-use paint measuring instrument with a top price-performance ratio.

For deliveries to countries outside the EU, the invoice amount is reduced by 19% VAT.

The shipping is free within the EU.

Buy the thickness gauge ET 111S directly in our online shop while supplies last.